<h3>SparkFun Special Function ICs</h3>
This library contains ICs that do not really fit into the other, more generic categories. Basically, anything that serves some function but has a bunch of brains or special bias circuitry that prevents it from being used as a general part qualifies for this category.
<p>Contents:
<ul><li>555 timers</li>
<li>LED drivers</li>
<li>H-Bridge drivers</li>
<li>Motor drivers</li>
<li>Waveform generators</li>
<li>Crypto</li>
</ul></p><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.SOIC, 0.15 inch width>NAME>VALUE<b>Dual In Line Package</b>>NAME>VALUE<h3>Dual In Line Package - 18 Pin </h3>
<p>Specifications:
<ul><li>Pin count: 18</li></p>
<p>Example device(s):
<ul><li>LM391</li>
</ul></p>>NAME>VALUE<h3>PLCC 20 Pin Square</h3>
<p>Specifications:
<ul><li>Pin count: 20</li>
</ul></p>
<p><a href=” http://focus.ti.com/en/download/qlty/LAND_PATTERN_RECOMMENDATIONS-MISC.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>LM391</li>
</ul></p>>NAME>VALUESOIC, 0.15 inch widthDual In Line PackageDual In Line Package - 18 Pin
Specifications:
Pin count: 18
Example device(s):
LM391
PLCC 20 Pin Square
Specifications:
Pin count: 20
Datasheet referenced for footprint
Example device(s):
LM391
>NAMEMSGEQ7<h3>[Manufacturer (if applicable)] [General Part Number (if applicable)] [Short Part Description (required)]</h3>
<p>[Few-sentence description of part(s)</p>>NAME>VALUE<h3>7-band graphic equalizer</h3>
<p>This IC is for making a 7 band/channel audio spectrometer.<br>
There are two versions of this part. The DIP available on the storefront, and the SO used in product.
<p><a href="https://www.sparkfun.com/datasheets/Components/General/MSGEQ7.pdf">Datasheet</a></p>
<h4>SparkFun Products</h4>
<ul>
<li><a href="https://www.sparkfun.com/products/10468">Storefront component: Graphic Equalizer Display Filter - MSGEQ7</a> (COM-10468)</li>
<li><a href="https://www.sparkfun.com/products/13116">SparkFun Spectrum Shield</a> (DEV-13116)</li>
</ul><h3>LM3914 Dot/Bar Display Driver</h3>
<p>TTL/CMOS Logic
<br>Drives LEDs, LCDs, Vacuum Fluorecents
<br>
Source:<br>
<a href="http://www.national.com/ds/LM/LM3915.pdf"> Data sheet LM3915</a><br>
<a href="http://www.national.com/ds/LM/LM3914.pdf"> Data sheet LM3914 </a></p>
<p><b>SparkFun Products:</b>
<ul><li><a href=”https://www.sparkfun.com/products/13688”>MyoWare LED Shield</a></li>
<li><a href=”https://www.sparkfun.com/products/12694”>Dot/Bar Display Driver - LM3914</a></li>
</ul></p><h3>SparkFun LEDs</h3>
This library contains discrete LEDs for illumination or indication, but no displays.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<B>LED 5mm PTH</B><p>
5 mm, round
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 5mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED-IR-THRU</li>>NAME>VALUE<h3>LED 3MM PTH</h3>
3 mm, round.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 3mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<h3>LED 1206 SMT</h3>
1206, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: </li>
<li>Area: 0.125" x 0.06"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<B>LED 0603 SMT</B><p>
0603, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:0.075inch </li>
<li>Area: 0.06" x 0.03"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED - BLUE</li>>NAME>VALUE<B>LED 10mm PTH</B><p>
10 mm, round
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.2inch</li>
<li>Diameter: 10mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li>LS>NAME>VALUE<B>LED 1206 SMT</B><p>
1206, surface mount
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Area: 0.125"x 0.06" </li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li>>NAME>VALUE<h3>LED 3MM PTH- No Silk</h3>
3 mm, round, no silk outline of package
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 3mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<h3>LED 5mm KIT PTH</h3>
<p>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 5mm</li>
</ul></p>
<p>Example Device:
<ul><li>LED</li>
</ul></p>>NAME>VALUE<h3>LED 1206 SMT</h3>
1206, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Area: 0.125" x 0.06"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUELED 5mm PTH
5 mm, round
Specifications:
Pin count: 2
Pin pitch: 0.1inch
Diameter: 5mm
Example device(s):
LED-IR-THRULED 3MM PTH
3 mm, round.
Specifications:
Pin count: 2
Pin pitch: 0.1inch
Diameter: 3mm
Example device(s):
LEDLED 1206 SMT
1206, surface mount.
Specifications:
Pin count: 2
Pin pitch:
Area: 0.125" x 0.06"
Example device(s):
LEDLED 0603 SMT
0603, surface mount.
Specifications:
Pin count: 2
Pin pitch:0.075inch
Area: 0.06" x 0.03"
Example device(s):
LED - BLUELED 10mm PTH
10 mm, round
Specifications:
Pin count: 2
Pin pitch: 0.2inch
Diameter: 10mm
Example device(s):
LEDLED 1206 SMT
1206, surface mount
Specifications:
Pin count: 2
Area: 0.125"x 0.06"
Example device(s):
LEDLED 3MM PTH- No Silk
3 mm, round, no silk outline of package
Specifications:
Pin count: 2
Pin pitch: 0.1inch
Diameter: 3mm
Example device(s):
LEDLED 5mm KIT PTH
Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
Specifications:
Pin count: 2
Pin pitch: 0.1inch
Diameter: 5mm
Example Device:
LED
LED 1206 SMT
1206, surface mount.
Specifications:
Pin count: 2
Area: 0.125" x 0.06"
Example device(s):
LED<h3>LED</h3>
<p></p>>NAME>VALUE<b>LED (Generic)</b>
<p>Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LEDs. Generic LEDs with no color specified.</p><h3>SparkFun Resistors</h3>
This library contains resistors. Reference designator:R.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>AXIAL-0.3</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>>Name>Value<h3>AXIAL-0.3-KIT</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>
<p><b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>>NAME>VALUE<p><b>Generic 1005 (0402) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 2012 (0805) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 3216 (1206) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEAXIAL-0.3
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.AXIAL-0.3-KIT
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.
Warning: This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.Generic 1005 (0402) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 2012 (0805) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 3216 (1206) package
0.2mm courtyard excess rounded to nearest 0.05mm.>NAME>VALUEGeneric Resistor Package<h3>SparkFun Electronics' Retired foot prints</h3>
In this library you'll find all manner of retired footprints for resistors, capacitors, board names, ICs, etc., that are <b> no longer used</b> in our catalog.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>Value>Name>Name>Value>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUEVarious small potentiometers for "set-and-forget" applications<h3>SparkFun Discrete Semiconductors</h3>
This library contains diodes, optoisolators, TRIACs, MOSFETs, transistors, etc.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.SOT23-3>NAME>VALUE<b>TO 92</b>>NAME>VALUE>NAME>VALUESOT23-3TO 92<h3> NPN Transistor</h3>
Allows current flow when high potential at base.>NAME>VALUE<h3>NPN transistor</h3>
<p>Current controlled devices typically used to amplify current or used as a switch.</p>
<ul>
<li>
BC547 -
<a href="http://www.sparkfun.com/products/8928">COM-08928</a>
(TO-92 45V 100mA) (1.Collector 2.Base 3.Emitter)
</li>
<li>
2N3904 -
<a href="http://www.sparkfun.com/products/521">COM-00521</a>
(TO-92 40V 200mA) (1.Emitter 2.Base 3.Collector)
</li>
<li>
P2N2222A -
<a href="http://www.sparkfun.com/products/12852">COM-12852</a>
(TO-92 40V 600mA) (1.Collector 2.Base 3.Emitter)
</li>
</ul><h3>SparkFun Capacitors</h3>
This library contains capacitors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<p><b>Generic 1005 (0402) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<h3>CAP-PTH-SMALL-KIT</h3>
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).<br>
<br>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.2 PTH spaced 0.1" apart>Name>ValueGeneric 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 1005 (0402) package
0.2mm courtyard excess rounded to nearest 0.05mm.CAP-PTH-SMALL-KIT
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).
Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.2 PTH spaced 0.1" apart>NAME>VALUE<h3>0.1µF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>1nF/1,000pF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>33pF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>22pF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p>>VALUE<b>SUPPLY SYMBOL</b><h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>VALUE>VALUE<b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b><h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find all manner of digital ICs- microcontrollers, memory chips, logic chips, FPGAs, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>NAME>VALUE>NAME>VALUEA simple USB 2.0 to Serial IC.<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>NAME>VALUE>NAME>VALUECAP-11812CAP-00867CAP-00810<br>
Ceramic<br>
Standard decoupling cap>NAME>VALUE>Name>Value>VALUE12>NAMESmall, 3.2x2.5mm, SMD Crystal<h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>USB Type B Female PTH Mounted</h3>
<p>Specifications:
<ul><li>Pin count:4 main, 2 shield</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/USB-B%20Connector.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>USB_B</li>
</ul></p>>NAME>VALUE<h3>2.5mm Stereo Audio Jack - PTH</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/19726.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>Audio_Jack_2.5MM</li>
</ul></p>>NAME>VALUE<h3>2.5mm Stereo Audio Jack - PTH Pogo Pin Compatible</h3>
Long pads to enable testing with pogo pins.
<p>Specifications:
<ul><li>Pin count:4</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/19726.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>Audio_Jack_2.5MM</li>
</ul></p><h3>2.5mm Stereo Audio Jack - PTH Holes Only</h3>
No electrical connections.
<p>Specifications:
<ul><li>Pin count:4</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/19726.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>Audio_Jack_2.5MM</li>
</ul></p><h3>2.5mm Stereo Audio Jack - SMT</h3>
<p>Specifications:
<ul><li>Pin count:5</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/19726.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>Audio_Jack_2.5MM</li>
</ul></p>>NAME>VALUEUSB Type B Female PTH Mounted
Specifications:
Pin count:4 main, 2 shield
Datasheet referenced for footprint
Example device(s):
USB_B
2.5mm Stereo Audio Jack - PTH
Specifications:
Pin count:4
Datasheet referenced for footprint
Example device(s):
Audio_Jack_2.5MM
2.5mm Stereo Audio Jack - PTH Pogo Pin Compatible
Long pads to enable testing with pogo pins.
Specifications:
Pin count:4
Datasheet referenced for footprint
Example device(s):
Audio_Jack_2.5MM
2.5mm Stereo Audio Jack - PTH Holes Only
No electrical connections.
Specifications:
Pin count:4
Datasheet referenced for footprint
Example device(s):
Audio_Jack_2.5MM
2.5mm Stereo Audio Jack - SMT
Specifications:
Pin count:5
Datasheet referenced for footprint
Example device(s):
Audio_Jack_2.5MM
<h3>USB A/B - with Shield Pins</h3>
<p>USB connector for type-A and type-B connectors. Includes shield pins broken out. </p>USB>NAME>VALUE<h3> Audio Jack </h3>
<p> 3 pin Basic Audio Jack</p>>NAME>VALUELR<h3>USB Type B Connector</h3>
<p></p>
<p>SparkFun Products:
<ul><li><a href=”https://www.sparkfun.com/products/13899”>SparkFun Stepoko</a> PTH</li>
</ul></p><h3>Audio Jack</h3>
<p>2.5mm variants of PTH and SMT audio jacks.</p>
<p>SparkFun Products:
<li><a href=”https://www.sparkfun.com/products/11888”>SparkFun PicoBoard</a>- 2.5mm SMD</li>
</ul></p><B>Dual In Line</B><p>
package type P>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>MICROCONTROLLER</b><p>
16 kBytes FLASH<p>
1 kBytes SRAM<p>
512 Bytes EEPROM<p>
USART<p>
8-channel 10 bit ADC<p><h3>SparkFun Power Symbols</h3>
This library contains power, ground, and voltage-supply symbols.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>VCC Voltage Supply</h3>>VALUE<h3>Digital Ground Supply</h3>>VALUE<h3>VCC Voltage Supply</h3>
<p>Positive voltage supply (traditionally for a BJT device, C=collector).</p><h3>Ground Supply Symbol</h3>
<p>Generic signal ground supply symbol.</p><h3>SparkFun Clocks, Oscillators and Resonators</h3>
This library contains the real-time clocks, oscillators, resonators, and crystals we use.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>5x3.2mm SMD Crystal</h3>
<p>Example: <a href="https://www.sparkfun.com/products/94">16MHz SMD Crystal</a> (<a href="https://www.sparkfun.com/datasheets/Components/SPK-5032-16MHZ.pdf">Datasheet</a>)</p>>NAME>VALUE<h3>HC49/US 11.6x4.6mm PTH Crystal</h3>
<p><a href="https://www.digikey.com/Web%20Export/Supplier%20Content/Citizen_300/PDF/Citizen_HC49US.pdf?redirected=1">Example Datasheet</a></p>>NAME>VALUE5x3.2mm SMD Crystal
Example: 16MHz SMD Crystal (Datasheet)HC49/US 11.6x4.6mm PTH Crystal
Example Datasheet<h3>Crystal (no ground pin)</h3>>NAME>VALUE12<h3>16MHz Crystal</h3>
<p><a href="http://www.digikey.com/product-search/en?keywords=535-9122-1-ND">Digikey Example</a></p>
<p><ul><li>Frequency: 16MHz</li>
<li>Frequency Stability: ±50ppm</li>
<li>Frequency Tolerance: ±20ppm</li>
<li>Load Capacitance: 18pF</li></ul></p>
<p><b>SparkFun Products:</b>
<ul><li><a href=”https://www.sparkfun.com/products/12640”>Pro Micro -5V/16MHz</a></li>
<li><a href=”https://www.sparkfun.com/products/10097”>SparkFun Serial Enabled LCD Kit</a></li>
</ul></p>
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.